Supraseal
Supraseal Butyl Flashing Tape – Roof Sealing & Repair Tape
Supraseal Butyl Flashing Tape – Roof Sealing & Repair Tape
Not sure which width? Answer 5 questions →
Couldn't load pickup availability
Supraseal® is a waterproof, self-adhesive butyl roof sealing tape that stops leaks in roofs, gutters and flashings in minutes, with no torch, primer pot or mess on most surfaces. Use it as a roof repair tape on flat and pitched roofs, as a roofing tape for laps, upstands and wall junctions, or as a bitumen-free lead flashing alternative. Roofers, maintenance teams and modular building makers use it for long-term repairs that stay flexible from -30°C to +80°C.
Which width do I need?
Overlap the defect by at least 50mm on every side, so add about 100mm to the size of the defect and pick the next width up.
- 50mm: nail and screw holes, pinholes, fine cracks, pipe and cable entries, quick van or caravan repairs. Also available as a pack of 3 with free delivery.
- 100mm: gutter joints, short seam or lap fixes, narrow modular and site cabin joints, splits up to about 50mm.
- 200mm: single-ply laps and seams (EPDM, TPO, PVC), upstands and abutments, corners, outlets and penetrations, splits of 50–100mm.
- 300mm: deep upstands and parapets, wide bay and module joints, large flat roof patches, valleys and wide flashings, splits over 100mm.
Delivery and returns
- Free UK delivery on orders over £50 + VAT. Under £50, delivery is just £3.95 + VAT (Royal Mail Tracked 48), or choose next-day delivery at checkout.
- Shipped from our UK warehouse in Leeds, with tracking.
- 300mm × 10m back in stock late November – order now to reserve. Pre-orders are dispatched as soon as the new stock arrives. All other sizes are in stock for next-day delivery.
- 30-day returns on unused items in original packaging (returns policy).
- Bulk, pallet or site deliveries: email hello@supraseal.com for a quote.
Why Supraseal
- Seals in minutes: cold applied, with no torch or liquid. The bond strengthens over time.
- Bitumen free: butyl based and non-staining on plastisol-coated steel.
- Built to last: UV stable, waterproof and airtight, from -30°C to +80°C.
- Moves with the roof: stays flexible as the roof heats and cools, and doesn't harden in sunlight.
- Forgiving: it can be repositioned in the first few minutes, and painted over to blend in.
- 10-year warranty.
Butyl vs bitumen roofing tape
| Supraseal® butyl tape | Bitumen flashing tape | |
|---|---|---|
| Hot weather | Stays put, doesn't soften or run | Can soften and slip in summer heat |
| Cold weather | Stays flexible down to -30°C | Can stiffen and crack |
| Sunlight | UV stable, doesn't harden | Ages and hardens with exposure |
| Coated metal and single-ply | Non-staining, suits EPDM, TPO and PVC | Can stain, and doesn't suit modern membranes |
| Warranty | 10 years | Varies by brand |
Where to use it
Lean-to roofs, conservatories, carports and canopies where polycarbonate sheets meet a wall; chimneys and roof lights; cladding and facade joints; gutters and flashings; caravans and motorhomes; and air-conditioning pipework where it passes through a wall. For shed, garage and flat felt roofs, see our roof felt repair tape guide.
Fitting tips
- Make sure the surface is clean, dry and free of dust and grease.
- On polycarbonate, don't clean with solvents: use soapy water and let it dry.
- Overlap joins by at least 50mm.
- Press it down firmly with a seam roller, working out any air.
Sticks to
EPDM, TPO and aged PVC single-ply membranes, concrete, masonry, fibre cement, clay tiles, slate, lead, aluminium, copper, glass, timber, fibreglass, polyethylene, polypropylene and polystyrene. On roofing felt, SBS bitumen and asphalt, prime the surface first for a lasting bond.
Butyl tape FAQs
What's the best tape for sealing a roof?
For a lasting repair, a butyl roof sealing tape like Supraseal®. It bonds to most roofing materials, stays flexible in heat and cold, and doesn't harden in sunlight. Pick a width that overlaps the damage by at least 50mm on every side.
Is Supraseal fully waterproof?
Yes. Once it's rolled down firmly on a clean, dry surface it forms a waterproof and airtight seal in minutes, and the bond keeps strengthening over time.
Is butyl tape better than bitumen flashing tape?
For a lasting repair, yes. Bitumen tapes can soften in summer heat, crack in the cold and stain coated metal. Butyl stays flexible from -30°C to +80°C, doesn't harden in sunlight and won't stain plastisol-coated steel.
Can I use it instead of lead flashing?
Yes. Supraseal is widely used as a lead flashing alternative at walls, chimneys and roof lights. It's lighter, has no scrap value to thieves and needs no hot works. See flashing tape vs lead flashing.
Does it need a primer?
Not on most clean, dry, firm surfaces. On roofing felt, SBS bitumen and asphalt, prime first: fresh bitumen gives off oils that can weaken any butyl bond over time, and a primer stops this. Brush off dust, moss and loose granules first, and roll the tape down firmly.
Can I apply it in cold or wet weather?
The surface must be dry and free of dust and grease. On cold days, keep the roll somewhere warm before you start, as the tape is easier to work when it isn't cold. More in our guide to applying flashing tape in cold or wet weather.
Can it be painted?
Yes, it can be painted over to blend in with the roof or wall.
How long does it last?
It's UV stable and backed by a 10-year Supraseal® warranty. Step-by-step guides: roof felt repair tape, leaking gutter joints, EPDM roof repair.
Specification
- Base: butyl compound, bitumen free
- Application: cold applied; roll firmly to start the bond
- Service temperature: -30°C to +80°C
- Widths: 50mm, 100mm, 200mm and 300mm, in 5m and 10m rolls (which width?). Also in white, 150mm x 10m for caravans and motorhomes, and black, 200mm x 10m.
- Classification: not classified as hazardous; not regulated for transport
Downloads
Technical data sheet (PDF) Request safety information sheet
Watch it applied
Apply it with our silicone seam roller. Buying for a crew, a production line or a merchant counter? Email hello@supraseal.com for trade and pallet pricing.
Technical specifications
| Base | Butyl rubber compound, bitumen free |
|---|---|
| Facing | Aluminium foil, with siliconised release liner |
| Colour | Grey |
| Thickness | 1.0mm |
| Shear adhesion | 2.1 N/mm (requirement 2.0 N/mm or more) |
| Peel strength | 0.4 N/mm to waterproofing membrane; 0.6 N/mm to cement board and coated steel |
| Peel strength retained after 168h heat ageing at 80°C, alkali soak and water immersion | 82% to 88% |
| Heat resistance | no flow, cracking or deformation at 80°C (2h) |
| Low-temperature flexibility | no cracks at -40°C |
| Service temperature | -30°C to +80°C |
| Application temperature | above +5°C |
| Self-healing | the butyl layer seals around small punctures |
| UV resistance | UV stable, suitable for exposed use |
| Finish | Can be painted |
| Compatible substrates | EPDM, TPO, aged PVC single ply, concrete, masonry, fibre cement, clay tiles, slate, lead, aluminium, copper, glass, timber, fibreglass, polyethylene, polypropylene, polystyrene; roofing felt, SBS bitumen and asphalt when primed |
| Shelf life | 3 years, stored at room temperature out of direct sunlight |
| Classification | Not classified as hazardous (article under REACH) |
| Warranty | 10 years |
