ClassicBond EPDM Rubber Roofing
One-piece EPDM rubber roof membranes, cut to length from 1.2mm and 1.5mm rolls, with the adhesives, trims and details to finish the job. Price your roof online in a couple of minutes.
- BBA certified (Agrément Certificate 22/6065)
- No heat or flame needed to install
- One-piece blankets, no seams on most roofs
- Delivered to site, with short lead times
- Supplied to modular and portable building manufacturers
EPDM roof calculator
Enter your roof size and edge details. You'll get a one-piece membrane cut to size, every adhesive, trim and corner you need, and a delivered price.
1Roof size
Measure the roof deck to the outside edges. We add the extra membrane for edges and upstands for you.
2What happens at each edge?
Tap an edge on the plan to change it, or use the lists.
3Details and delivery
4Your details
How it goes on
Cold-applied, with no heat or flame. Everything in the calculator is what you need to finish the roof.




Suits most flat roofs
From garages and extensions to modular buildings, schools and industrial units.




ClassicBond EPDM downloads
Certificate, fitting guide and data sheet. Enter your details and the download links appear straight away.
- BBA certificate 22/6065 PDF, 13 pages
- Installation guide PDF, 3 pages
- Technical data sheet PDF, 1 page
Supraseal supplies ClassicBond® EPDM rubber roofing membrane and the full range of ClassicBond accessories. Send us your roof sizes and we'll come back with a quote, usually the same working day.
Roof blankets, cut to size
We supply one-piece EPDM roof blankets cut to your length from standard roll widths, so most flat roofs, extensions, garages and modular buildings can be covered with no seams at all.
- 1.2mm ClassicBond EPDM: widths of 3.05m, 3.66m, 4.00m, 4.57m, 5.08m, 6.10m, 7.62m and 9.15m, cut to length or as whole 30.5m rolls
- 1.5mm ClassicBond EPDM: widths of 3.05m, 4.57m, 6.10m, 7.62m and 9.15m, cut to length or as whole 30.5m rolls
- BBA certified membrane
Adhesives and accessories
- Adhesives: water-based deck adhesive, contact bonding adhesive (tins and aerosol) and spray adhesive systems
- Pressure-sensitive tapes and flashings: Secure Tape, cover strip and uncured flashing for joints, corners and details
- Primer, lap sealant, water cut-off mastic and pourable sealer
- Edge trims: SureEdge PVC check kerb and gutter trims in black and anthracite, plus plastisol metal trims and termination bars
- Outlets and penetrations: roof drains, angled outlets, pipe seals and pipe pockets
- Fasteners, walkway pads and installation tools
Modular and portable buildings
We've supplied EPDM roof blankets to modular building manufacturers and hire fleets for years. Tell us the cabin or bay sizes and how many you need, and we'll price the whole order. Pair it with Supraseal® Weatherproofing Tape for bay joints and quick repairs.
Get a quote
Use the form below. In the message box, please include:
- The roof size (length × width) or a sketch, and how many roofs
- Membrane thickness (1.2mm or 1.5mm), if you know it
- Deck type (e.g. OSB, plywood, metal) and any upstands, outlets or pipes
- Which trims and adhesives you need, or ask us to list them for you
- The delivery postcode and the date you need it
We supply materials only and don't install. Prefer email? Write to hello@supraseal.com. Trade customers can also apply for a trade account.
Just need a few items? Buy ClassicBond membrane, adhesives, SureEdge trims and accessories individually. Shop EPDM membrane & accessories →